yanfan001 Posted May 16, 2019 Share Posted May 16, 2019 Nikon Camera Control Pro 2.28.2 Multilingual macOS | 118.2 MB Nikon Camera Control Pro - This software is designed to remotely manage the settings of most digital SLR cameras Nikon. The camera can be connected to a computer via USB cable to a wired or wireless network using a wireless transmitter.Main Features: * Most settings of Nikon digital SLRs, that are connected via USB cable, such as exposure mode, shutter speed, and aperture can be controlled remotely from a computer, Wired or wireless LAN is also available when using a wireless transmitter. * In addition to direct transfer of images from a camera to computer, all procedures from shooting to saving images are smoothly processed. * Enhanced viewer function enables thumbnail display of images stored in a computer. * Integration with other Nikon software: * Support for ViewNX browser and viewer software. * Support for Capture NX photo-finishing software.What's new in Nikon Camera Control Pro 2: Picture Control Utility: In certain Nikon digital SLRs such as the D3, D700, D300 and D90 customized image adjustment, including tone compensation curve data, can be saved to tailor the camera's behavior to the photographer's vision, improving efficiency when using multiple cameras at the same time. Compatible with WiFi operation: In addition to supporting USB cable connections, Camera Control Pro offers compatibility with the optional wireless transmitter models WT-2a, WT-3a and WT-4A. When attached to a digital SLR, the WT-2a, WT-3a and WT-4A enable remote shooting and setting via a wireless LAN over WiFi. Compatible with Nikon's Image Authentication Function: Image data can be transferred and stored without affecting the authentication function. Take Control of Your Photography-Remotely: Using the included USB or Firewire cable and/or optional WiFi adapters for select models, Nikon Camera Control Pro enables you to capture unique images no matter what the subject. LiveView support: Live previews direct from the camera are supported on the D3, D700, D300 and D90 when this feature is enabled. See what you are about to shoot! Improved graphic user interface: A simulated (camera) LCD panel on the computer screen performs the same function as the camera's viewfinder display which has been modified to be consistent with those used in the latest cameras for smoother operation. - Dynamic-area AF (9 points) - Electronic VR - Flicker reduction - Movies with files sizes over 4 GB - macOS 10.4.11, 10.5.8, 10.6.8 support added. Higher is also supported.Home Page - http://imaging.nikon.com/lineup/software/control_pro2/ Download link: https://uploadgig.com/file/download/dc09432c89C9fe63/8dalk.Nikon.Camera.Control.Pro.2.28.2.macOS.zip https://rapidgator.net/file/6f794fe3ddd7d326c64464e9b4645cef/8dalk.Nikon.Camera.Control.Pro.2.28.2.macOS.zip.html http://nitroflare.com/view/B887D4BDC4BC100/8dalk.Nikon.Camera.Control.Pro.2.28.2.macOS.zip Links are Interchangeable - No Password - Single Extraction Quote Link to comment Share on other sites More sharing options...
0DayReleases Posted October 30, 2019 Share Posted October 30, 2019 Nikon Camera Control Pro 2.29.1 MultilingualFile Size: 308 MiB This software remotely controls most functions of Nikon digital SLRs from a computer that is connected via USB cable or through wired or wireless LAN using a wireless transmitter. Advanced functions of the new Nikon D3 and D300 such as Viewer for preview and selection of images prior to transfer to a computer, Liveview function and Picture Control System are supported. It also supports workflows of Nikon's exclusive photofinishing software Capture NX (optional) and browser and viewer software ViewNX. Most settings of Nikon digital SLRs, that are connected via USB cable, such as exposure mode, shutter speed and aperture can be controlled remotely from a computer. Wired or wireless LAN is also available when using a wireless transmitter. In addition to direct transfer of images from a camera to a computer, all procedures from shooting to saving images are smoothly processed. Enhanced viewer function enables thumbnail display of images stored in a computer. Compatible with the new functions of the Nikon D3/D300 Images in a camera buffer can be confirmed with thumbnail or preview display on a computer prior to transferring, enabling deletion of unnecessary images. This remarkably increases efficiency. Supporting the Liveview mode (Hand-held mode and Tripod mode) of the D3 and D300, it permits adjustment of focus point and shutter release while confirming the image on a computer. In Tripod mode, focal-plane contrast AF on a desired point within a specific area is possible. It also supports Picture Control System of the cameras. Picture Control parameters can be selected and adjusted on a computer, and custom curves (tone compensation data) can be created and registered 51-point AF can be controlled and displayed. Fine tuning of the new white balance is available. Integration with other Nikon software Support for ViewNX browser and viewer software Support for Capture NX photo-finishing softwareWhats New: Added support for the Z 50Please register to see this content. DownLoad NitroFlare https://nitroflare.com/view/CEAD42E0315E0C9/Nikon.Camera.Control.Pro.2.29.1.Multilingual.rar RapidGator https://rapidgator.net/file/f8b71fca3c7df002eded9bb0dbf311c5/Nikon.Camera.Control.Pro.2.29.1.Multilingual.rar.html UploadGiG https://uploadgig.com/file/download/60Cb0746d4032613/Nikon.Camera.Control.Pro.2.29.1.Multilingual.rar Quote Link to comment Share on other sites More sharing options...
0DayReleases Posted November 28, 2019 Share Posted November 28, 2019 Nikon Camera Control Pro 2.29.1a MultilingualFile Size: 308 MiB This software remotely controls most functions of Nikon digital SLRs from a computer that is connected via USB cable or through wired or wireless LAN using a wireless transmitter. Advanced functions of the new Nikon D3 and D300 such as Viewer for preview and selection of images prior to transfer to a computer, Liveview function and Picture Control System are supported. It also supports workflows of Nikon's exclusive photofinishing software Capture NX (optional) and browser and viewer software ViewNX. Most settings of Nikon digital SLRs, that are connected via USB cable, such as exposure mode, shutter speed and aperture can be controlled remotely from a computer. Wired or wireless LAN is also available when using a wireless transmitter. In addition to direct transfer of images from a camera to a computer, all procedures from shooting to saving images are smoothly processed. Enhanced viewer function enables thumbnail display of images stored in a computer.Compatible with the new functions of the Nikon D3/D300 Images in a camera buffer can be confirmed with thumbnail or preview display on a computer prior to transferring, enabling deletion of unnecessary images. This remarkably increases efficiency. Supporting the Liveview mode (Hand-held mode and Tripod mode) of the D3 and D300, it permits adjustment of focus point and shutter release while confirming the image on a computer. In Tripod mode, focal-plane contrast AF on a desired point within a specific area is possible. It also supports Picture Control System of the cameras. Picture Control parameters can be selected and adjusted on a computer, and custom curves (tone compensation data) can be created and registered 51-point AF can be controlled and displayed. Fine tuning of the new white balance is available.Integration with other Nikon software Support for ViewNX browser and viewer software Support for Capture NX photo-finishing softwareWhats New: Fixed an issue that caused certain anti-virus software to mistakenly identify the "IFGLS001.exe" and "ifasglog.exe" files in the installation destination folder as viruses during or after installation.Please register to see this content. DownLoad NitroFlare https://nitroflare.com/view/8644277879435FB/Nikon.Camera.Control.Pro.2.29.1a.Multilingual.rar RapidGator https://rapidgator.net/file/54c023887588fc04d57363b2f46cb392/Nikon.Camera.Control.Pro.2.29.1a.Multilingual.rar.html UploadGiG https://uploadgig.com/file/download/d09ec8f5025e4640/Nikon.Camera.Control.Pro.2.29.1a.Multilingual.rar Quote Link to comment Share on other sites More sharing options...
0DayReleases Posted January 16, 2020 Share Posted January 16, 2020 Nikon Camera Control Pro 2.30.0 MultilingualFile Size: 296 MiB This software remotely controls most functions of Nikon digital SLRs from a computer that is connected via USB cable or through wired or wireless LAN using a wireless transmitter. Advanced functions of the new Nikon D3 and D300 such as Viewer for preview and selection of images prior to transfer to a computer, Liveview function and Picture Control System are supported. It also supports workflows of Nikon's exclusive photofinishing software Capture NX (optional) and browser and viewer software ViewNX. Most settings of Nikon digital SLRs, that are connected via USB cable, such as exposure mode, shutter speed and aperture can be controlled remotely from a computer. Wired or wireless LAN is also available when using a wireless transmitter. In addition to direct transfer of images from a camera to a computer, all procedures from shooting to saving images are smoothly processed. Enhanced viewer function enables thumbnail display of images stored in a computer.Compatible with the new functions of the Nikon D3/D300 Images in a camera buffer can be confirmed with thumbnail or preview display on a computer prior to transferring, enabling deletion of unnecessary images. This remarkably increases efficiency. Supporting the Liveview mode (Hand-held mode and Tripod mode) of the D3 and D300, it permits adjustment of focus point and shutter release while confirming the image on a computer. In Tripod mode, focal-plane contrast AF on a desired point within a specific area is possible. It also supports Picture Control System of the cameras. Picture Control parameters can be selected and adjusted on a computer, and custom curves (tone compensation data) can be created and registered 51-point AF can be controlled and displayed. Fine tuning of the new white balance is available.Integration with other Nikon software Support for ViewNX browser and viewer software Support for Capture NX photo-finishing softwareWhats New: Added support for the D780. • Ended support for Windows 7.Please register to see this content. DownLoad NitroFlare https://nitroflare.com/view/FE8E2366E1B5106/Nikon.Camera.Control.Pro.2.30.0.Multilingual.rar RapidGator https://rapidgator.net/file/d9d3950ef671dbdb8eb752dc2c9e3a9a/Nikon.Camera.Control.Pro.2.30.0.Multilingual.rar.html UploadGiG https://uploadgig.com/file/download/cfb1D3Ad6bc9a895/Nikon.Camera.Control.Pro.2.30.0.Multilingual.rar Quote Link to comment Share on other sites More sharing options...
BaDshaH Posted January 19, 2020 Share Posted January 19, 2020 File size: 305 MBNikon Camera Control Pro - This software is designed to remotely manage the settings of most digital SLR cameras Nikon. The camera can be connected to a computer via USB cable to a wired or wireless network using a wireless transmitter. Main Features:• Most settings of Nikon digital SLRs, that are connected via USB cable, such as exposure mode, shutter speed, and aperture can be controlled remotely from a computer, Wired or wireless LAN is also available when using a wireless transmitter.• In addition to direct transfer of images from a camera to computer, all procedures from shooting to saving images are smoothly processed.• Enhanced viewer function enables thumbnail display of images stored in a computer.• Integration with other Nikon software:• Support for ViewNX browser and viewer software.• Support for Capture NX photo-finishing software.What's new in Nikon Camera Control Pro 2:Picture Control Utility: In certain Nikon digital SLRs such as the D3, D700, D300 and D90 customized image adjustment, including tone compensation curve data, can be saved to tailor the camera's behavior to the photographer's vision, improving efficiency when using multiple cameras at the same time.Compatible with WiFi operation: In addition to supporting USB cable connections, Camera Control Pro offers compatibility with the optional wireless transmitter models WT-2a, WT-3a and WT-4A. When attached to a digital SLR, the WT-2a, WT-3a and WT-4A enable remote shooting and setting via a wireless LAN over WiFi.Compatible with Nikon's Image Authentication Function: Image data can be transferred and stored without affecting the authentication function.Take Control of Your Photography-Remotely: Using the included USB or Firewire cable and/or optional WiFi adapters for select models, Nikon Camera Control Pro enables you to capture unique images no matter what the subject.LiveView support: Live previews direct from the camera are supported on the D3, D700, D300 and D90 when this feature is enabled. See what you are about to shoot!Improved graphic user interface: A simulated (camera) LCD panel on the computer screen performs the same function as the camera's viewfinder display which has been modified to be consistent with those used in the latest cameras for smoother operation.RELEASE NOTES:Added support for the D780.• Ended support for Windows 7.System Requirements:- Microsoft Windows XP Home Service Pack 3 and higher is supported.- Both the 32- and 64-bit versions of Windows 7 and Windows Vista are supported. - Under 64-bit versions, this software operates as a 32-bit application.- Only 32-bit version of Windows XP is supported.- macOS 10.4.11, 10.5.8, 10.6.8 support added. Higher is also supported.HOMEPAGEhttps://imaging.nikon.com/lineup/software/control_pro2/ Download From UploadGig https://uploadgig.com/file/download/ab188196dc349138/BaDshaH.CameraControl2.30.rar Download From Rapidgator https://rapidgator.net/file/2e12e2a55e5f56360ad384e6b09dc8b0 Download From Nitroflare http://nitroflare.com/view/626867592F2E5F2/BaDshaH.CameraControl2.30.rar Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.